TRAVEL:
--X: 72.83”
--Y: 51.18”
--Z: 39.37”
SPINDLE NOSE TO PALLET TOP: -3.94 to 35.43”
SPINDLE CENTER TO PALLET CENTER: -22.83 to 50”
SPINDLE CENTER TO PALLET TOP: 5.91 to 45.28”
SPINDLE NOSE TO PALLET CENTER: -32.68 to 40.16”

PALLET:
MAX WORK DIMENSION: 39.37 x 39.37”
MAX LOAD CAPACITY: 4,400 LBS
INDEXING ANGLE (CURVE COUPLING ORIENTATION) 5 MM
INDEXING ANGLE (ANY NC ORIENTATION): .001 IN
FLOOR TO PALLET TOP: 50.79”

SPINDLE:
SPINDLE SPEED MIN -1: 10,000 RPM
SPINDLE TAPER HOLE: NO. 50
SPINDLE SWIVEL ANGLE: 150
INDEXING ANGLE (CURVE INDEXING): 5
INDEXING ANGLE (NC ARBITRARY INDEXING) MM .001

FEED:
RAPID TRAVERSE RATE: M/MIN (IPM) X/Y: 24,000, Z: 12,000
RAPID TRAVERSE RATE DEG/MIN: B/C: 4
CUTTING FEED RATE M/MIN (IPM) X/Y/Z: 1 ~ 10,000
CUTTING FEED RATE: B/C: 1 ~ 1,080


MOTORS:
SPINDLE: 30 min/cont HP
FEED AXES (X/Y & Z): X/Y 7.0, Z: 6.0
SPINDLE SWIVEL SERVE MOTOR: 4
TABLE INDEXING SERVE MOTOR KW: 7 (9.3)

ATC:
TOOL SHANK: MAS403BT50
PULL STUD: MAS407 P50T-II
TOOL CAPACITY: 100
MAX. TOOL DIAMETER: ø4.72“
MAX. TOOL DIAMETER (W/O ADJACENT TOOL): 9.45”
MAX TOOL LENGTH/WEIGHT (MM/KG): 500/25
MAX TOOL MOMENT N•M (FT•LBF): 44.1 (32.43)
TOOL SELECTION: FIXED ADDRESS
TIME NEEDED FOR TOOL CHANGE (TOOL TO TOOL) SEC: 9

APC:
APC: 2 PALLET ROTARY SHUTTLE AUTOMATIC PALLET CHANGER
APC TIME SEC: 30

SIZE:
EFFECTIVE WIDTH BETWEEN COLUMNS: 49.21”
MACHINE HEIGHT: 166.30”
MACHINE WEIGHT WIDTH X DEPTH: 204.33” x 279.53”
WEIGHT: 52,800 LBS
POWER CAPACITY KVA: OSP: 51.1, FANUC: 61

CNC:
OPS-P200M, FANUC 31 i-A5

Machinery Resources Int'l Inc
1650 Voyager Ave Simi Valley CA 93063
Tel: 877-568-2121 Fax: 818-346-7986
Email (Request Quote): inquiries@machineryresources.com
Web: www.machineryresources.com